The Direct-Pure® UP Ultrapure & RO Water System is an integrated system that produces ultrapure and reverse osmosis (RO) water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.
Electrical and water compartments are completely
segregated, thus safer to operate.
The fully automated control system contains pre-rinse,
RO membrane fouling preventing flush, RO membrane
and cartridge life monitoring as well as many
other programs for convenient operation.
The pre-rinsing program starts automatically when a
new RO membrane is installed so there is no need
for users to set up additional cleaning procedures.
Two sets of dual-column purification cartridges work sequentially
to ensure thorough removal of ions and organics in water.
The system recirculates automatically every hour
to prevent microbial from growing
Resistivity is measured by a high-precision resistivity meter.
Users can set water dispensing time for easy water collection.
The system is equipped with a 30-liter PE tank
(upgradable to a 60-liter) and a liquid level sensor.
A 0.2 μm final filter or ultrafiltration filter (optional)
removes final contaminants.
RephiLe can provide full document support
to meet users GMP, GLP, FDA and other certification requirements.
| Ultrapure Water
|| RO Pure Water
| HPLC mobile phase preparation
Preparation of reagent blank solution
As sample diluents for GC, HPLC, AA, ICP-MS and other analytical techniques
Preparation of buffer and culture media for mammalian cell culture
Preparation of molecular biology reagents, etc.
| Glassware cleaning
Washing machine for glassware
Water bath water
Feed water to laboratory animals
| Feed Water Quality
| Tap water*
|| Municipal water, TDS
| Operating Temperature
| Feed Water Pressure
|| 15 - 60 psi (1 - 4 bar)
| Water Production Rate
| Ultrapure water (Type I)
|| 1.5 L/min at 25
| RO water
|| 10 or 20 L/h at 25
| Product Water Quality
|| 18.2 MΩcm at 25
| Particle (>0.2 µm)
|| <1/ml iwith a 0.2 µm final filterj
| Pyrogens (endotoxins)
|| <0.001Eu/ml iwith a terminal ultrafiltration cartridgej
| Length x Depth x Height
|| 30.3 cm × 51.2 cm ×48.2 cm
| Net Weight (Operating Weight)
|| 22 - 25 kg (25 - 32 kg)
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
** Product water quality may vary depending on local feed water conditions.
|| Catalog No.
| Direct-Pure UP 10 Ultrapure and RO Water System
| Direct-Pure UP 20 Ultrapure and RO Water System
| Direct-Pure UP 10 Ultrapure and 2-Pass RO Water System
| Direct-Pure UP UV 10 Ultrapure and RO Water System
| Direct-Pure UP UV 20 Ultrapure and RO Water System
| Direct-Pure UP UV 10 Ultrapure and 2-Pass RO Water System