The Direct-Pure® RO lab water system produces reverse osmosis (RO) water from tap water directly.
Electrical and water compartments are completely segregated, thus safer to operate.
The Fully automated control system contains pre-rinse,
RO membrane fouling preventing flush, RO membrane
life detection as well as many other programs for convenient operation.
The pre-rinsing program starts automatically when a
new RO membrane is installed so there is no need
for users to set up additional cleaning procedures.
User can set water dispensing time for easy water collection.
The system is equipped with a 30-liter PE tank
(upgradeable to a 60-liter) with a liquid level sensor.
RephiLe can provide full document support to
meet users GMP, GLP, FDA and other certification requirements.
Pure water can be used in many areas. Here are some typical applications.
Manual cleaning and glassware rinsing
Laboratory animal feed
Feed water for ultrapure water systems
| Feed Water Requirements
| Tap water*
|| Municipal water, TDS < 1000 ppm (2000 μS/cm)
| Operating Temperature
| Feed Water Pressure
|| 15 - 60 psi (1 - 4 bar)
| Product Water Flow Rate
|| 10 or 20 L/h at 25
| RO Rejection Rate
| Monovalent ions removal
|| >95% (>99% with 2-Pass RO system)
| Polyvalent ions removal
| Bacteria and Particles removal
| Organics and Pyrogens removal
| Length x Depth x Height
|| 30.3 cm × 51.2 cm × 48.2 cm
| Net Weight (Operating Weight)
|| 18 - 21 kg
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
|| Catalog No.
| Direct-Pure RO 10 Pure Water System
| Direct-Pure RO 20 Pure Water System
| Direct-Pure 2-Pass RO 10 Pure Water System