Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
This round bottom tube is designed for use in Beckman Coulter instruments and rotors. Ultra-Clear tubes are transparent, allowing for easy location of visibly banded or pelleted samples.
Compatible Ultracentrifuge Rotors
- Fixed Angle: Type 70 Ti, Type 50.2 Ti
- Swinging Bucket: SW 32 Ti, SW 28
Compatible High Performance Rotor
- Swinging Bucket: JS-24.38
Certified-free and sterile tubes are also available.
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are for Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone standards are for Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature-sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½-liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield viscometer or rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Flexible G-96 WELL Block is used with Aeris™ Thermal Cycler and is interchangeable with four other blocs.
Applicable consumables: 0.2 mL tube, 96-well microplate, 12 x 8 strips, 8 x 12 strips.
Accurate determination of a protein’s charge heterogeneity helps establish identity and stability. Capillary Isoelectric Focusing (cIEF) is a powerful technique that allows quantitative analysis of a protein’s isoelectric point (pI). In cIEF, a mixture of sample and ampholyte is introduced into a capillary and subjected to electrophoretic separation. In this process, a pH gradient through which analytes migrate to their respective pI is formed.
The PA 800 Plus Pharmaceutical Analysis System automates the advanced cIEF technology necessary to successfully achieve high precision and quantitative separations. The use of optimized universal methods and synthetic pI markers attains the highest levels of precision in pI calculation and direct isoform quantitation with on-line UV detection.
This kit provides reagent volumes for analysis of 100 samples and includes:
• eCap Neutral Capillary, 1 unit
• cIEF gel
• cIEF Peptide Marker Kit, 5 vials (pI 4.1, pI 5.5, pI 7.0, pI 9.5, pI 10.0), 240 µL each
• Sample Loading Solution (SLS), 6 mL
• CE Grade Water
NOTE: Additional reagents from other vendors are required for this application. Methods and necessary supplies can be referenced in the following AIBs, available for download at www.sciex.com:
• A-11634: Identification of System Parameters Critical for High-Performance cIEF
• A-12015: A Robust cIEF Method: Intermediate Precision for the pH 5-7 Range
• A-12026: High-Resolution cIEF of Therapeutic Monoclonal Antibodies: A Platform Method Covering pH 4-10
Calorific standard in powder or pellet form for standardizing all oxygen bomb calorimeters. Benzoic acid, 0.2 gram pellets, bottle of 1000 pellets.
CAP Viscometer Oil Fluids are used for calibrating CAP series viscometers.
General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.
FEATURES & BENEFITS
- Accuracy: +/-1% of viscosity value
- Appropriate for use at shear rates greater than 500 sec-1
- Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP
- Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes. Note: Other oil fluids are available - call for details
- Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
- The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration.
- CAP Oil Fluids are supplied in 150 mL (4 oz) containers
The COULTER LATRON CP-X Control is supplied as a ready-to-use suspension of latex particles. These particles pass through the flow cell and produce
characteristic electrical signals that are measured as volume, conductivity and various angles of light scatter and light loss, for quality control of Coulter
Cellular Analysis Systems with VCSn technology.
MATERIALS PROVIDED:
• LATRON CP-X Control - 8 x 4 mL
• Table of EXPECTED RESULTS containing Assigned Values and EXPECTED RANGE
G15 15µm Silica Carbide Control for use with the LS 13 320 XR particle size analyzer.